Manufacturing

Wear components

Shrouds and composite wear plate for impact, abrasion and heat.

Shrouds

  • Lip Shroud
  • Heel Shroud
  • Side Arm Shroud

Composite Wear Plate

Seven grades. The first table gives the type, hardness and alloy base of each; the second gives what each grade is for.

Brand Type Hardness Alloy base
MTS 1055 Impact & Abrasion Rc 50 to 55 C, Si, Mn, Cr
MTS TIC Impact & Abrasion Rc 55 to 58 C, Si, Mn, Cr, Ti
MTS TICC Impact & Abrasion Rc 58 to 60 C, Si, Mn, Cr, Ti
MTS 4000UT Abrasion Rc 58 to 62 C, Si, Mn, Cr, B
MTS 4000 XT Abrasion Rc 60 to 64 C, Si, Mn, Cr, B
MTS 2000 HT Abrasion & Heat Rc 58 to 62 C, Si, Mn, Cr, Mo, Nb, B
MTS 2000 XHT Abrasion & Heat Rc 58 to 62 C, Si, Mn, Cr, Ni, W, B
Brand Properties Applications
MTS 1055 Chromium Carbides in tough Austenite matrix Suitable for moderate impact and severe abrasion. For use on grizzly bars, Impact plate, Dumper body, etc.
MTS TIC Titanium Carbides uniformly dispersed in Martensitic matrix Suitable for high stress abrasion. For use on transfer chutes, deflector plates, etc.
MTS TICC Titanium Carbides uniformly dispersed in Austenitic matrix Suitable for medium stress severe abrasion. For use on transfer chutes, deflector plates, excavator buckets, etc.
MTS 4000UT Chromium Carbides in Austenitic matrix Suitable for low stress abrasion and erosion. Ideal for chutes, skirt liners, deflector plates, buckets, skip car, exhauster blades, etc.
MTS 4000 XT Chromium Carbides in Austenitic matrix Suitable for severe abrasion & erosion. Applications like ID fan, slurry pipes, sand chutes, cyclones, scraper blades, bucket lips, etc.
MTS 2000 HT Multi Alloy carbides in Austenitic matrix Suitable for abrasion resistance at high temperature.
MTS 2000 XHT Complex carbide in austenitic matrix Suitable for abrasion at elevated temperature. Ideal for use on Coke quenching car, coal burner nozzle, Sinter breaker housing, BF chute, etc.

Job work to drawing or sample

Need a part made to your drawing or sample?

Tell us what the part is for, and attach your drawing or a photo of the sample.

Up to 3 files, 2 MB each. PDF, Word, Excel, PowerPoint, text or image.

    By sending this you agree to be contacted about your enquiry. Privacy policy